The DIN 2527 flanges that meet this standard's specifications can be utilized up to 16 bars of operating pressure at 120°C, which is the temperature at which they are most notable. It should be taken into consideration that the material's or the DIN 2527 PN6 flange yield point will decrease at higher temperatures, such as 120°C to 300°C.

The standard is identified as DIN 2527 in the DIN 2527 flange dimensions pdf. Both carbon steel and stainless steel are among the materials included in the standard, aside from the DIN 2527 PN40 flange specifications. These components go toward making the DIN 2527 externally disabled flanges. Steel grades that are cast or fabricated are used in the production of DIN 2527 PN16 flanges.

Shasan Piping Solution The size blueprint for the ASME B16.5 standard flange, which has a size range of ½ inch (15 NB) to 48 inch (1200 NB), or DN10~DN5000, is also included in the DIN 2527 PN10 flange dimensions. The surface treatment of the DIN 2527 PN10 flange is a significant component. The DIN 2527 PN16 flange is often surface Stainless by either applying zinc maintenance to the flange using various techniques. For example, cold or hot dive galvanization can be used to coat the externally weak flange DIN 2527 PN6 with a thick layer of zinc.

The DIN 2527 PN16 blind flange's exterior layer can be electroplated to apply a light layer of zinc coating. The DIN 2527 PN10 flange has been coated in a variety of ways, including Oil Dim Paint, Against Rust Paint, and Yellow Direct. The DIN 2527 PN10 flange's work administration life is extended and its corrosion resistance is further developed by coating or surface treating it. The majority of DIN 2527 pipe flange makers and manufacturers are able to provide test results, EN 10204/3.1B, 100% radiography test reports, authentication of raw components, outcast inspection reports, and so on.